Start a conversation

Accessing the Pulse / Edstrom (Avidity) Freezer Monitoring System

PLEASE NOTE: The Pulse system has been replaced by Isensix for most all monitoring of systems.  


If you have been assigned access to the Pulse system for freezer and other equipment monitoring, you can access the system to review and silence alerts from inside and outside of the VBRI network:

INSIDE the FBRI Network: If you are in the FBRI or connected to the VPN, you can access the Pulse Console via: http://pulse.vtc.vt.edu. Use your assigned Pulse credentials to login. NOTE: It can take a minute or two for the Pulse login screen to load.

OUTSIDE the FBRI Network: If you are not at the FBRI and need access to the Pulse Console, visit https://pulse.vtc.vt.edu. Use your FBRI credentials (those used to log into our resources such as email) on the very first screen, and then use your assigned Pulse credentials when the Pulse Console login appears. NOTE: It can take a minute or two for the Pulse login screen to load.

If you need credentials to log into Pulse, have your Lab Manager or PI "Start a Conversation" on this site to submit a request for access. Have them include the specific equipment you will need access to.

*For detailed instructions, please see the attached document

Avidity_Science_(Edstrom)_Pulse_Instructions.docx

  1. 531 KB
  2. View
  3. Download
Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. Thomas Wertalik

  2. Posted
  3. Updated

Comments